Fsbuild-2 Flight Planner

Seems like the VNAV Speed is not changing now unless I turn the VNAV on and off. Still using my 1.6 isg.cfg and aircaft.cfg settings plus the new entry for the minimum climb speed so I dont think I missed anything.

_________________
Dave Opper
ESSB - Stockholm, Sweden

Well for example with a target climb speed of 300 knots and a 250/10000 speed restriction, at 10,000 ft. the AP speed would change to 300, and then bump down to 280 at cruise level. Same at the TOD where it drop to 270 or so. The speed descent restriction at 10000 will stay at 270 even though in the cfg its set at 240. All speeds are depending what I have set in the individual aircraft files. The only way it changes now is by clicking the VNAV button on and off again.

_________________
Dave Opper
ESSB - Stockholm, Sweden

It was still at 270 knots at 8000 Ft. Until I clicked the vnav button on and off and it dropped to 240. I've been using these same settings for years now.
Seems like something is broken with the "VnavSetSpd=0 " function/setting in the isg.cfg file. I've even tried changing it to 1 again just out of curiosity.
I'll try to get screenie in asap. I have a heavy work week this week.

_________________
Dave Opper
ESSB - Stockholm, Sweden