Fsbuild-2 Flight Planner

I just bought isg 1.51 and try to incorporate it in the Bill Grabowski panel for ERJ-145 aircraft. So far the ND display, MCU and GNSXLS do show up and a flightplan load does work but...
1) When slewing trhu the flightplan in map mode VOR, NDB show ok but Airports seem to have wrong distances. f.i. when being exactly 20NM from EDDF the Airport symbol shows at 40NM When nearing the symbol comes closer and is at 10NM when te aircraft is at 7NM. The airport symbol ssems to come closer at double speed so it is only correct when the aircraft is at the airport !!

2) The fixes from the loaded flightplan show only as small stars without the identifier name and only a few other fixes/waypoints. Is this the correct behaviour?

FS 2004
Win Xp Professional
Intel E8400 @3,4 Ghz - 4 Gb Ram
Nvidia GeForce 8800 GTS 512
2 x 750Gb SATA drives

Any help would be appreciated
Thanks

Some more screenshots when tracking the 086 radial of "LEG" VOR.
Look at the distances of the green LEG and blue EDDP in both pictures.
Hope this can help you trackdown the problem.

Some info of the gauge in the panel:

[Window01]
file=ERJ_MFD.bmp
size_mm=1024,768
windowsize_ratio=1.0
position=0
VISIBLE=1
update_rate=6
ident=15

gauge00=ERJ!Clock,8,415,75
gauge01=ERJ!PFD,91,382,255,270
gauge02=ERJ!HSI,373,398,224,172
gauge03=ERJ!Radios,614,530,158,181
gauge04=ERJ!EICAS,789,390,220,259
gauge05=ERJ!SB_Attitude,613,367,78
gauge06=ERJ!Airspeed,619,447,65
Gauge19=isg1!HW_B737_EFIS_CNTR,-45,495,135,105
//---------------

[Window07]
BACKGROUND_COLOR=4,4,4
size_mm=227,260 //172
window_pos=0.364,0.506
VISIBLE=0
ident=10104
//position=4

Gauge00=isg1!HW_B737_ND_nb, 0,0,225,258,erj145
gauge01=isg1_tcas!logic, 1,1,1,1

regards
nand144

Ernie,
Some additional info:
1) I replaced the gauge with the PROLINE4 and this seems to be ok on the distances. no differences here. Only the range and heading markers in APP - PLAN - MAP do not show.
2) There seem to be 2 isg1.gau gauges on the system:
1 In gauges subfolder dated 14/08/2008 (13500 Kb) and
1 In isg subfolder dated 09/12/2006 (4904 Kb).

regards
nand144

I looked into, yes you're right the APTS are slightly off scale on the ND.

See your PM, I've sent you a hotfix for it.

Let use know if those issues are fixed, and we'll then send it on to simmarket as the 152 update/patch.

Note this patch install will not work unless you have the full version already installed.

The missing text from the flight plan, is due to the fact the installer was not able to install and register the required font.

Try running the installer as the adminstrator and see if the fotnts get installed properly. This is the full installer, the font is not included in the 152 patch I just sent you.

Regards.
Ernie.