Fsbuild-2 Flight Planner

A happy an successful new year to you.

Some days ago I bought your ISG1 - instruments. The implementation was suceessful an I did a first flight from ESSA (Stockholm) to EKCH (Copenhagen - Kastrup). Everything did very well.

Yesterday I filed a flight from EDDW (Bremen, Germany) to EDDS (Stuttgart,Germany). The Waypoints are EDDW,WRB,EDEGA,AMETU,SOGMI,BOMBI,NEKAT,LAMGO,EDDS

The FPL was created with MS-FPL and after saving I copied the plan to the ISG/Flightplan folder. After loading the FPL with the MCU I activated after eparture LVAV mode.
Just on the first leg I archieve a difference from 30 degrees from the bearing which gives the MCU and the bearing from the MS-internal GPS from EDDW to WRB. On the other legs this difference is similar.

For your complete information i will attch a the panel.cfg and the flightplan file to this question.

What must be done to solve this problem?



[/url]http://wetter-jfub.serveftp.org/vfs/fs/panel.cfg[/url]

Thanks for you help.

Hello,

today I installed your brandnew patch 2. But, sorry it doesn't work better then before. What I didn't write this thread is, that I am using FS9. The problem ist same as before.

When I position my airplane in EDDW (Gate 6) and load with the MCU the flightplan the HSI shows me a position about 30 NM East of Bremen



The MCU displays the target of the first leg



The MS-GPS displays the correct position at Gate 6 at EDDW



And thats the flightplan:





with regards

Jannes Fischer