Fsbuild-2 Flight Planner

Hi,
I fly FSX and C130 Captain Sim, H version with French Air Force repaint.
I recently downloaded the Panel retrofit for this model in the dedicated page. I replaced the panel.cfg in FSX by the one provided and launched FSX... all gauges are black
I run FSX mostly using the VC.
What did I do wrong ?
What did I miss ?
Is the retrofit working for FSX ?
I noticed on the picture that there is an instrument showing over the dashboard which is not available on my model...
Can anyone help me to resolve my issue ?

Note: I am using the ISG gauges with E3-C without any problem, but none of the gauges is integrated in the dashboard, only in 2D windows.
Bruno

_________________
Bruno
VATFrance member

FSX SP2
W7-64, Intel Core I7+3770K, RAM16Gb, SSD264 + HDD 2To, NVidia GTX660, Surround 3 x 29inc,
Saitek Yoke Pro + Throttle quadrant, Multi panel, Rudder pedals, Thrustmaster MFD Cougar x2

Hi Bruno,

thanks for flowers on my abilities. I am not an expert, but what could be root cause: The panel retrofit is not for FSX?
Also I had a similar problem, when the whole airplane disappeared because I tried to insert the FMS into the VC of an FSX airplane.

Maybe you check the panel file for the vc section first
Good luck
Helmut

Hi Helmut,
Hummmm Might be the reason because there is no specific mention of FSX in the panel for C130H as I could see for some other.
I would be very grateful if the team of ISG could clearly mention the compatibilities of EACH panel whwther with FS9, FSX or any other
I am requesting this because I would like to also download the panel for B707 which as well doesn't mention FSX...

WAIT and SEE if they see my post and if they wish to commit in doing this .
Thanks again Helmut and chuss
Bruno

_________________
Bruno
VATFrance member

FSX SP2
W7-64, Intel Core I7+3770K, RAM16Gb, SSD264 + HDD 2To, NVidia GTX660, Surround 3 x 29inc,
Saitek Yoke Pro + Throttle quadrant, Multi panel, Rudder pedals, Thrustmaster MFD Cougar x2