I cannot make the EFS50_EHSI gauge pop up larger when I click on its hotspot centre.
Here are the three relevant sections of the panel.cfg:
[Window Titles] Window00=Panel BG - DO NOT CLOSE! Window01=PIC Switch Panel Window02=Co-pilot Switch Panel Window03=PIC Fuel Panel Window04=Throttle Quadrant Window05=Radio Stack Window06=Collins APS-65 Autopilot Window07=Overhead Window08=Bendix KLN90B Window09=Cabin Pressurization Window10=PIC VFR View Window11=PIC IFR View Window12=CP VFR View Window13=CP IFR View Window14=EADI Pop-Up Window15=EHSI Pop-Up Window16=TCAS Pop-Up Window17=OAT and ELT Window18=Chronograph/Clock Window19=HDG CRS Popup Window20=HDG CRS Popup IFR Window21=Engine Instruments Window22=ISG GNSXLS POPUP Window23=ISG EFS0_EHSI_CNTR Window24=ISG MCU POPUP
//-------------------------------------
[Window10] file=pic_vfr_tcas.bmp size_mm=1280,960 position=7 visible=1 ident=1
gauge00=awx.b20!EADI, 300,562,200,195,picvfr gauge01=ISG1!EFS50_EHSI, 299,762,200,195 gauge02=awb2001!awb200......etc
//---------------------------------------------
[Window15] size_mm=384,371 window_size_ratio=1.000 position=0 visible=0 ident4008 window_size= 0.220, 0.293 window_pos= 0.235, 0.720
gauge00=isg1!EFS50_EHSI, 0,0,384,371,WN
Any advice gratefully received.
_________________ John
|