Fsbuild-2 Flight Planner

Hi guys,
I want to add ISG to the Project Airbuses but don`t know how to start. Want to still add lot of things into freewares and the PAirbus are the one.
Can some help me to insert the ISG. I don`t want to use retrofit A320, I would to create it. Thanks

I'm interested too, Ernie. All PA models are available here: http://www.pafs.wf/

Ideally, I'd like an Airbus-type panel which worked in 319, 320, 321 types, but if only one is possible, then A320.

Thanks.

John

_________________
John

Thanks, Ernie, but....

The PA panels are aliased to the default B737. When I replace this .cfg with your retro panel.cfg all I get is your gauges - all the rest of the panel is black. I am running FS9, BTW.
Also, I'm not sure what is going on with the aircraft.cfg file. This seems to be for an FSX CRJ700.

_________________
John

Thanks again, but our wires are crossed.

I wish to use an ISG retro fit panel on the Project Airbuses. When I use the panel.cfg you have posted in the Project Airbus panel all I get is your gauges. The rest of the panel is black.
All the Project Airbus A320/321 series use the default B737 panel. They come with that! This is why I wish to install an ISG Airbus-style retrofit.

Again, I am not sure what the CRJ700 aircraft.cfg file is doing in your ISG Project Airbus retrofit zip file.

Best regards

_________________
John

_________________
John

Worked perfect for me using FSX.

Ernie,

Firstly, thanks for producing your FMC system. I have used it for a few years in FS9 (which I am still with).

The only time I have angst is when I have to uprgrade or change my PC drives.

I have the O/S on C: drv and FS9 on E: drv.

Following a recent upgrade I find that in the iSG 'aircraft file' I only have the FS9 main a/c affiliated to your program. ie the B737_400 and the other main stock FS9 jets eg Lear and B777 and 747.

I have operated the Project Airbus quite happily using your gauges fitted to a panel made by Ken Mitchell. When I start up the A-320 the gauges are all there, but the FMC does not recognise the airbus or access the navdata.

I know this is because somwhere in my upgrade I have lost the orig iSG 'aircraft' file
and the latest version only reflects the default FS9 a/c.

Have tried to insert an aircraft file based on the 737-400 but labelled as Airbus without success.

Am aware that you went into the affiliation of a/c into your programme in some detail. Unfortunately seem to have lost your notes on this subject.

Any advice on the integration of the a/c into the programme following gauge installation would be appreciated.

Rgds
Mal

Guys, be aware that this for Projects Airbus A320 fsx only. I tried to install on PA319FD V3 didn`t work.
I will request the retrofit for Projects Airbus A319 and A318.

Thanks Ernie.