Fsbuild-2 Flight Planner

Ernie et alia,

For some reason with this settings, I cannot get the SMITHS FMC to read the ISG/Aircraft/DC10 file. Any help gratefully accepted. I have moved the "DC10" 5th character around to almost every position so far.

panel file

[Window Titles]
Window00=PILOTS
Window01=COPILOTS
Window02=MD11 CTRL
Window03=FLIGHT ENGINEER UPPER
Window04=LOWER ELEC PANEL
Window05=UPPER ELECT PANEL
Window06=OVERHEAD
Window07=LOWER PRESS PANEL
Window08=UPPER PRESS PANEL
Window09=LOWER ENGINE PANEL
Window10=UPPER ENGINE PANEL
Window11=PEDESTAL
Window12=FUEL PANEL
Window13=HYDRAULICS PANEL
Window14=FMC
Window15=AILERON AND RUDDER TRIM
Window16=FIRE HANDLES
Window17=ICONS
Window18=MD11 ND
Window19=FMC ISG

[window00]
blaablaa....

gauge41=isg1!FMS2_OPEN, 88,947,25,28
gauge42=isg1!LNAV, 88,979,25,28
gauge43=isg1!VNAV, 88,1012,25,28
gauge44=CLS_DC10_FSX!ICON_FE, 145,979,25,28
gauge45=CLS_DC10_FSX!ICON_KC10REFUEL_ARM, 173,947,25,28
gauge46=CLS_DC10_FSX!ICON_KC10REFUELSLIDER, 173,978,25,28
gauge47=CLS_DC10_FSX!ICON_KC10REFUELTUBE, 173,1011,25,28
gauge48=CLS_DC10_FSX!ICON_OVERHEAD_OPEN, 145,1011,25,28
gauge49=CLS_DC10_FSX!ICON_PEDESTAL, 145,1045,25,28
gauge50=CLS_DC10_FSX!ICON_STAIRS, 173,1046,25,28
gauge51=CLS_DC10_FSX!ICON_CHECKLIST, 117,947,25,28
gauge52=CLS_DC10_FSX!ICON_FMC_, 145,947,25,28
gauge53=isg1!HW_MD11_ND, 725,926,182,214,DC10
gauge54=isg1!EFIS_CTRL_OPEN, 88,1044,25,28
gauge55=isg1_TCAS!Logic, 1,1,1,1

//--------------------------------------------------------
[Window18]
Background_color=0,0,0
size_mm=291,319
window_size_ratio=1.000
position=0
visible=0
ident=4014
window_size= 0.250, 0.350
window_pos= 0.700, 0.550

gauge00=isg1!HW_MD11_ND, 0,0,291,319, WN
gauge01=isg1_TCAS!Logic, 1,1,1,1

//--------------------------------------------------------
[Window19]
Background_color=0,0,0
size_mm=415,640
window_size_ratio=1.000
position=0
visible=0
ident=4012
window_size= 0.300, 0.450
window_pos= 0.410, 0.500

gauge00=isg1!SMITHS_FMS, 0,0,415,640

DC10 file in the ISG>Aircraft folder

;McDonnell Douglas KC-10A config
ApprFlapsMin=32
ApprFlapsMax=40
BestHoldIas=215
ClbAltRest=10000
ClbSpdRest=250
ClimbIasMax=300
ClimbIasMin=250
ClimbIas=270
ClimbRate=1800
CostIndex=100
CruiseIasMax=350
CruiseIasMin=260
CruiseIas=300
DescAltRest=10000
DescentIas=290
DescentIasMax=310
DescentIasMin=250
DescentRate=1800
DescSpdRest=250
DispPrevWpt=1
FlyoverWptChgDist=2
FPA=3.0
MaxCruise=35000
MaxVnavDescRate=2000
MaxVnavClimbRate=2500
MFDTextAntiAlias=0
MinMapRange=0.5
MinVnavIas=155
MinVNavRadioAlt=1500
ModelId=MD KC-10 Extender
SequenceFPlanWpts=1
ShowTodBodIndicators=1
TcasVertRange=14000
TOFlaps=15
V1=130
VR=155
V2=175
VnavSetAlts=0
Vref=120
WptChgDist=2

_________________
Thanks,

Sean

[quote="Trooper63"]Ernie et alia,

For some reason with this settings, I cannot get the SMITHS FMC to read the ISG/Aircraft/DC10 file. Any help gratefully accepted. I have moved the "DC10" 5th character around to almost every position so far.

Did you name the file /DC10.cfg ??

If so, it should work.

Regards.
Ernie.

Thanks Ernie,

Yes here is the ISG/Aircraft folder contents;



hope you can spot the issue for me.

_________________
Thanks,

Sean

uncheck hide extensions of known file types in explorer folder options.

Maybe the .cfg part is being hidden from the gauge on your system.

Regards.
Ernie.

Changed, but has made no difference. Still no sight of the acft config. Im going to trial changing to a different acft file.

_________________
Thanks,

Sean