Fsbuild-2 Flight Planner

I purchased the ISG1 package two days ago and installed it along with Jennik Prazak's panel retrofit for the Flight 1 PC-12.

So far it has been nothing but a major headache.

Earlier tonight I switched from one aircraft to the PC-12 and got error messages indcating that FS9 would not load the ISG1.gau file. I had to exit out of the sim and reopen to get the plane and gauges to function.

I've had several flights with the modified PC-12 and I continue to encounter the same problem. The gauges work quite well and look great. But when I attempt to exit the flight, FS9 freezes. Lock solid. No error messages. Nothing. I actually have to reboot my entire machine to get things back to normal.

I discovered later that the lockup was related to the PC12.cfg file. By removing the reference from the panel.cfg, I had no more lockups. Still there seems to be an issue with switching to or from another aircraft. Last time I attempted to switch to another aircraft I got a CTD.

This is most baffling. I'd sure like some suggestions on what to look for.

--WH

I don't have any suggestions.

A lockup on switching from one aircraft to another can happen for any number of reasons.

If it were happening to other ISG1 users then it be a cause to investigate. But there's not much to go on here. I have the same Flight1 PC-12 and don't seem to have this freezing issue.

Regards.
Ernie.