Fsbuild-2 Flight Planner

Thanks Ernie.

I installed the latest update and that seemed to have fixed the problem. Unfortunately, now I've lost the BOD on my P1000 MFD.

Any idea why?

Is the software set up to only allow you to have one BOD on a guage at a time (i.e., one must choose between the HSI and P1000)?

Here's my ISG cfg:

LoadFuelonFlightPlanLoad=1 // Load Fuel automatically when Flight Plan is loaded into FMC or MCU
SetDestLoadTowerViewDist=20 // The distance from the destination airport when the tower view is changed to the destination (FS9 only)
SetMCUToPageOnFPlanLoad=1 // Set the active page on the MCU to the 'TO:' page when a flight plan is loaded.
DispAppPtrnAlts=1 // Display Approach and traffic pattern alts
ShowTodBodIndicators=1 // Show TOD/BOD indicators
DispPrevWpt=1 // Display Previous flight plan waypoint (MFD,EHSI).
ParkingFile=isg_parking.txt // Parking positions file
WptProcChgDist= // Waypoint change distance for procedures (Sid,Star, etc)
WptChgDist= //The distance (Lnav) the autopilot switches to tracking the next waypoint
VnavSetAlts=1 //Does not set altitudes when VNAV is on (default is 1)
VrefMin=115
BestHoldIas=140
MFDTextAntiAlias=1
ModelId=Beechcraft Premier
VnavSetSpd=0
WptChgSecs=10

WptProcChgSecs=10
DrawBodArcOnP1000MFD=1
DrawBodArcOnEFS50EHSI=1
MaxVnavDescRate=1800

It may be confused by the blank line between WptChgSecs and WptProcChgSecs.

Thanks, Owen. I tried eliminating that gap but it made no difference.

Odd thing is, the BOD works flawlessly on the HSI but it just doesn't work on the P1000 MFD anymore.