Fsbuild-2 Flight Planner

Ernie,

I worked on this for days. I use Flight Aware to my flight plan waypoints, example: MERIT3 MERIT HFD PUT EBONY N123A YAY NATW PIKIL NATW SOVED NIBOG UN551 NELBO UP6 REMSI UL603 TEBRO T150 ROLIS When I download the FSB Nats and using NATW I cannot get the waypoints of the NAT to insert into this flight plan. FSB will freeze and allow no inserts the NAT will not copy and go into the flight plan line. Just confused.

Can you go step by step on how you insert the NATW into this flight plan.

Thanks

Bob Johnson

Keep in mind the NATS change a couple of times a day at least.

So the Eastbound NAT track for the flightware plan may have been active at the time it was filed. But a several hours later they will stop publishing the eastbound tracks and only the westbound tracks will be available. so if you build you route when the eastbound tracks are no longer available it won't find the waypoints.

Regards.
Ernie.

Hi Ernie, thanks for the reply, but that is not what I was asking. What I want to know is after I get a NAT, take me through the step by step process to insert into FSB along with my flight plan. Here is an example, I obtain my flight plan from Flight Aware, MERIT3 MERIT HFD PUT EBONY N123A YAY NATW PIKIL NATW SOVED NIBOG UN551 NELBO UP6 REMSI UL603 TEBRO T150 ROLIS . I get my NATS in FSB and I use NATW , I then cannot get the NAT to be inserted into my flight plan. My question, how do I do that in FSB?

Bob

Thanks Ernie, on my trip to Europe later gonna use this for now.

Bob